Toshiba RD-XV47KE - Manual (Page 94)

94 EN
4. DTS (Default: On)
Set the DTS.
(Follow steps 1 to 2 on page 93.)
Select “DTS” using [Cursor U / D ],
then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U / D ], then press [ENTER].
The selected setting will be checked and
activated.
On: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to “On”.
Off: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to “Off”.
5. Dynamic Range Control (Default: On)
Set to “On” to make the dynamic range narrower.
(Follow steps 1 to 2 on page 93.)
Select “Dynamic Range Control”
using [Cursor
U / D ], then press
[ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U / D ], then press [ENTER].
The selected setting will be checked and
activated.
Playback
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Playback” using
[Cursor
U / D ], then press [ENTER].
3 Select a desired item using
[Cursor
U / D ], then press [ENTER].
4
Refer to 1. to 10. on pages 94 to 97
and set the selected item.
5 When you finish with the setting,
press [SETUP] to exit.
1. Audio Language (Default: Original)
Set the Audio language.
(Follow steps 1 to 2 above.)
Select “Language” using
[Cursor
U / D ], then press [ENTER].
Language Menu will appear.
Select “Audio Language” using
[Cursor
U / D ], then press [ENTER].
Off Off
On
Off Off
On
Setup Menu 01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
01/01/07(Mon) 19:34 Playback
Parental Lock
Angle Icon
TV System
V. Replay/Skip Speed
Media Select
DivX(R)VOD
Initialise
Still Mode
CD Playback Mode
Language
Subtitle Language
DivX Subtitle
Disc Menu Language
Audio Language
E3B90ED_EN.book Page 94 Friday, February 23, 2007 12:38 PM