Trixter X-Bike - Manual (Page 30)

27
E
QUIPMENT AND
T
ECHNICAL
I
NFORMATION
Please refer to Illustrations on Pages 30 to 32 for more information
X-Bike Frame Specifications
Frame Tubular Steel
Pedal drive system Freewheel drive pedals to Flywheel
Pedals Either Toe clip or SPD compatible clip less pedals
Flywheel 40 lb (18.2kg)
Flywheel resistance Multi-positio n SRAM Grip-shift™
Felt flywheel resistant pads 75mm x 25mm (3” x 1”) Felt Pads to provide smooth pedal action
Quick release height adjustment for handlebars 150mm (6”) vertical adjustment
Quick release saddle height adjustment 340mm (13.5") saddle height adjustment
Quick release saddle reach adjustment 75mm (3") saddle reach adjustment
Tilt Adjustable saddle Yes
Metallic and lacquer protected paint system Yes
Transport wheels on front base leg Yes
Protective plastic caps on base legs. Yes
Water bottle cage fittings Yes
Chain tension adjustment Yes
Non-slip rubber base for leveller feet Optional
Elbow pads and arm rests. Optional
X-Bars Specifications
Handlebar banking Angle to Bump Stops 12°
Handlebar banking Angle with stops compressed 14°
Maximum Horizontal Throw 102mm
Maximum Vertical Throw 60.8mm
Return to Zero Yes
RTZ spring resistance From 300N at centre to 775N at max extremes
X-Bar Damping resistance adjustability 10Kg-f to 50Kg-f
X-Bar Damping range 7 positions
Max allo wable force up on handlebars 500N
Max allowable force down on handlebars 1000N
Max Force Fwd/Back on the handlebars 500N
Maximum torque about head tube 170 N-m
General
Nominal height to centre of handlebars 980mm
Distance from centre of handlebars to Seat Post 580mm nom. (+/- 100mm)
Distance from centre of handlebars to Head Tube 50mm nom.
Pitch of X-Bar movement to horizontal 72 Deg
Adaptor Bespoke to suit a range of exercise spinner bikes
Base Width 700mm wide base legs to provide excellent stability.
Mechanism Structure Die Cast Aluminium 356, machined aluminium and Hard Anodised
6061.
Bearings S45C and SCM430 Steel Chrome Plated
Bushings and Slider Materials Igus Iglidur G and MC901
Covers Injection Moulded ABS
Handlebars HANDLEBARS - 580mm to 680 max straight with 5 deg sweep
with wall thickness 3.2mm at centre. Material 2014 Aluminium -
Black anodise.
Bar Ends BAR ENDS - 28.6mm O/D as per SOS Boxer Design. Finish –
Black Anodised. Material 2014 Aluminium.
Hand Grips GRIPS - Length 11.5cm to 12cm. Colour Black. Finish ribbed
Fasteners Zinc & Clear Passivate