Trixter X-Bike - Manual (Page 36)

33
riders from below 5’ (1.5m) to 7’ (2.15M) tall. Laser etched reference marks on
the seat post make resetting a favorite position easy.
o Saddle Tilt of 1.5” (38mm) fore/aft adjustment.
o Four leveller feet can be adjusted to compensate for irregular floor surfaces.
o Easily accessible Chain tension adjusting bolts to allow simple chain adjustment.
Safety
o The X-Bars™ Handlebar System mechanism is enclosed to minimize the
possibility of contact with moving parts.
o The Grip-Shift™ position on the handlebars allow the rider to maintain hands and
grip in their assumed riding position for comfort, safety and non- interruption to
the exercise routine.
o X-Bars™ System buffered end stop within the mechanism to provide smooth
transition between left and right body movement ensuring no body injury.
o Hi-grip compound bar end covers to provide excellent hand grips at the
outermost point of the handlebars.
o 28” (700mm) wide base feet for added stability and safety have been fully tilt-
table tested.
o Non-slip rubber cushions under the leveller feet to ensure no bike movement,
even when bike is vigorously worked.
o Freewheel mechanism as per standard bicycle ensuring safer cycling with the
absence of the inertia of a fixed flywheel.
o Double-sided pedals giving the 2 safe options of either toe clips or shoe clips.
Style & Comfort
o Highly attractive and futuristic curved monocoque X-Bike™ Frame built from
round and elliptical tubular steel.
o 3 Tone, corrosion-resistant, zinc plated and powder coated metallic paint system
with added protective and cosmetic enhancing clear lacquer coating system for
unrivalled presentation and corrosion resistance.
o Integrated moving covers system displaying working geometry.
o Stylish front fender enhancing X-Bike’s™ look and keeping the corporate
curved image throughout.
o Contoured highly cushioned seat – male and female for maximum comfort
o Rider controls are all conveniently located, simple to use and allow for
maximum rider comfort and non- interrupted X-Biking™ Ride.
Protection
o Paint system – as above with the added benefit of accepting all conventional
cleaning materials.
o Sweat protection – All covers and general X-Bike features are specifically
designed to channel sweat away from sensitive areas.
o Rubber seals provided at all points directly within the sweat zone ensuring no
sweat ingress to the working mechanisms.
o Easily replaceable plastic covers on the handlebars and frame to protect your
investment.
o Plastic kick-plate cover to protect the frame paintwork when mounting and
dismounting the X-Bike™ Indoor Cycle.
o Front flywheel fender to channel sweat away from sensitive areas including
moving parts and V-Brake system.