Trixter X-Bike - Manual (Page 34)

31
X-Bike

Indoor Performance Bike F
EATURES
Structure
X-BIKE™ Indoor Performance Bike
o
High strength attractive tubular and elliptical steel X-bike™ Frame to provide
an incredibly solid X-Bike™, strong enough to handle riders 300lbs (135kg).
o 170 mm forged aluminium alloy crank arms with ISIS spline bottom bracket
mount with 104/64, 4 bolt chain ring pattern for increased strength and reliability.
Crank arms are interchangeable with all popular top quality crank arms except
Shimano, so users can install their desired crank arm length.
o 40lb (18.2kg) Balanced Cast Flywheel providing optimum pedalling inertia.
o Heavy gauge steel chain guard sufficiently rigid not to crack or bend.
o High strength elliptical tube 700mm wide base legs for total stability
o Stainless Steel hardware throughout mechanism to prevent corrosion or
freezing.
o Maximum Dimensions (Not working): Lth 47.5 inches x Wth 28.5 inches x Hgt
39 inches
o Maximum User Weight Capacity: 300 lbs
o Commercial Warranty: Frame-5 Years, Parts-1 Years, Labor-6 Months, Wear
Items-6 Months (Country Dependent). The following parts list includes all wear
parts that are protected under the warranty terms for a period of six- months past
the date of X-Bike

Indoor Performance Bike purchase:
•
Damper Unit
•
Height Adjustment Knobs
•
Damper Access Seal
•
Levelling Feet
•
Flywheel Resistance Pads
•
PU Transport
Wheels
•
Centre Slider Block
•
Handlebar and Bar End Grips
•
‘Return to Zero’ Springs
•
Resistance Cable (Twist Grip to V-Brake)
•
‘Return to Zero’ Spring Pillars
All other part and components are protected under the warranty for twelve-
months after date of purchase. The X-Bike

Frame is protected under the
warranty for five- years after date purchase.
X-BARS™ Handlebar System
o
The die cast aluminium X-Bars™ System is lightweight with high strength
properties capable of withstanding 125lb- ft (170N-m) torque and 220lb (100kg)
vertical load at the end of the handlebars.
o Authentic tamper proof “Trixter Enabled” identification holographic decal placed
under the surface clear coat.
o Laser etched chrome plated square X-Bars™ adaptor to provide total lock
against turning slip.
o X-Bars™ Bearings and Pivots constructed from high wear resistant Chrome
Plated Hardened Steel S45C and SCM430 materials.
o X-Bars™ Pivot Bushings and sliders constructed from maintenance free self
lubricating composites paired up with slide runners made from high wearing
hard anodised aluminium.
o 27” (680mm) straight 2014 aluminium handlebars to cater for wide reach upper
body workout.