Tekkeon MP3450-10 - Manual (Page 12)

10
Recording Device Information
The Device At-A-Glance Card included with myPower ALL Plus enables you to record
the information you need to use myPower ALL Plus with each of your portable
devices. Simply record the device name, required voltage, and reference letter for the
compatible adapter. Store the card in the pocket provided inside the soft cover.
Obtaining Adapters
Eight adapter plugs that fit most DC adapter jacks on a variety of portable devices, and
a USB tip are included with myPower ALL Plus. If none of these plugs fits snugly into your portable device
power jack, please go to our web site at www.tekkeon.com/mpadapters to determine which adapter plug
you need for your device. You can obtain most adapters through the web site, or by contacting Tekkeon by
phone at 888-787-5888 or 1-714-832-1266. If available through Tekkeon, the adapter will be sent to you for
a nominal fee.
Using the Extended Battery (MP3450-10)
You can double the capacity of myPower ALL Plus by adding the extra battery unit MP3450-10. When
MP3450-10 is added to MP3450, the battery capacity shown on the indicators includes the capacity
available with MP3450-10.
Adding the Extended Battery
1. Place MP3450 on top of MP3450-10 with both flat silver ends facing the same direction.
2. Connect the bracket with the 3-pin plugs inside to the silver ends of the devices.
The 3-pin plugs will mate with the battery port on each of the devices, and the
controls on the end of MP3450 will show through the bracket opening.
3. Connect the second bracket on the opposite end of the devices to hold
the units together securely.
4. Use MP3450 as you would normally.