Tekkeon MP3450-10 - Manual (Page 9)

7 USER GUIDE
TIP: You can optimize the use of myPower ALL Plus with your laptop computer or portable DVD player
by setting the voltage on myPower ALL Plus to less than the required voltage shown on the laptop
computer power supply. This prevents myPower ALL Plus from charging the device, thus extending the
amount of time you can use myPower ALL Plus to power your laptop computer.
Most laptop computers have a battery voltage of 11.1V or 14.8V, allowing them to be powered with 12V
or 14V. Therefore, it is recommended that you set the voltage to 12V first, and then test to see if it will
power your laptop. If not, increase the voltage to 14V, and retest. Repeat this process until you reach the
voltage that will power your laptop.
Most portable DVD players require 9 or 12 volts. Set the voltage to 7.5V and test to see if myPower ALL
Plus will power your device at this setting. If not, increase the voltage by one level and retest.
myPower ALL Plus VOLTAGE SELECTION
Device Type
Voltage on Device Suggested Voltage on
Power Adapter myPower ALL Plus
Laptop Computers
14V 12V
16V 14V
19V 14 - 16V
24V 19V
Portable DVD Players
9V 7.5 - 9V
12V 9 - 12V
Digital Cameras 5 - 6V 5 - 6V
CD Players 4.5 - 5V 5V
PDAs 5V 5V
Mobile Phones 3.7 - 6V 5 - 6V
Digital Camcorders
9V 7.5 - 9V
12V 9 - 12V
MP3/MP4 5V 5V
This table
provides
recommended
voltage
settings by
device type.