Connections and initial set up, Reinstalling channels (updating) – Technicolor - Thomson DTH8060 User Manual
Page 13
13
E N
E N
Connections and initial set up
Reinstalling channels (updating)
If new channels make their way into the audiovisual scene, you will have to update your DVD
recorder’s list of channels. In such a case, start a new channel search from the installation menu.
This set-up deletes all stored channels and resets all the channels that your DVD recorder can
receive. If you only want to set-up a single channel, refer to the manual search on page 12.
1.
If the main menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Channel search line using the
or
keys, and press
OK
to validate.
An installation window will appear. A cursor shows the
progress in the set-up of the channels.When all the
channels that you can receive in your area have been
stored,
100 %
is indicated. Press
OK
to return to the
Channel search
line. Press
MENU
to return to the
Main Menu.
Sorting channels
1.
If the Main Menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Channel List line using the
or
keys, and press
OK
to validate.
Refer to the Channel Sorting paragraph on page 7 to check or sort out the channels
stored on your DVD recorder.
2_DTH8060_en.qxd 17/08/05 12:21 Page 13