Technicolor - Thomson DTH8060 - Manual (Page 29)

29
E N E N
Recording functions
Programming a recording
You can record a future programme by programming its recording time. For this you have the
choice of manual programming or Naviclick programming, explained on page 31. Open the DVD
tray by pressing the
OPEN/CLOSE key. Put in a disc with the printed side upwards. Close the
tray using the OPEN/CLOSE key.
Manual programming in 10 steps
1. From the main menu ( MENU key or in Stop mode) select the Timers function with the
key or then confirm using the OK key.
• The Timers screen is displayed. It contains a list of all the deferred recordings that you
have already programmed, whether carried out manually, as explained below, or using the
Naviclick function explained on page 31. If nothing has been programmed the screen simply
displays Add Timer.
2. Press the OK key.
• The programming menu is displayed.This menu allows you to define all the parameters
necessary for a deferred recording. Select each parameter with the or key and enter
the corresponding information with the number keys or the key as described below.
Note: your DVD recorder can memorise the parameters of 8
different programmings. In the case of double programming, a
warning message is displayed.
3. Name
Give a Name to your programme. Press the INFO key to access the keyboard table. Use the
keys , , , and OK to compose the title of the recording letter by letter.When
complete, select Keep Timer with and press OK.
4. Channel
a) Enter the channel number using the digit keys of the remote control (Pr -- must be displayed)
or browse the list of channels in the memory of the DVD recorder using the
PR+/PR- key.
b) Or select one of the Audio-Video (AV2,AV3,AV4) sockets to which is connected a device
(satellite receiver or other) using the
key (the socket details are shown on page 20).
Note: selecting the AV2 connector allows you to program the recording of a satellite reciever programme
(either left switched on or also programmed) connected to this connector. The selecting of the AV2 connector
is activated by default by the AV Timer function (triggering of programming via the AV connector).
5. Day (s)
Using the digit keys on the remote control type in the date, if the recording is not made the
same day, and / or select a period using the
key.
Once: to record the selected programme according to the parameters you have defined.
Every Fri: to record the same programme the same day every week starting from today (supposing today
is Friday).
MON-FRI: to record the same programme, everyday at the same time from Monday to Friday.
2_DTH8060_en.qxd 17/08/05 12:22 Page 29