Further information, Troubleshooting guide – Technicolor - Thomson DTH8060 User Manual

Page 70

Advertising
background image

70

Troubleshooting guide

If you encounter difficulties

Advisors are at your disposal to help
you solve your problems at this
telephone number.

This THOMSON product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be
disposed of separately from your household waste.
Please, dispose of this equipment at your local community waste collection/recycling
centre.

In the European Union there are separate collection systems for used electrical and electronic
product.
Please, help us to conserve the environment we live in!

Remote control

The remote control doesn’t work

• To control your DVD recorder, you must first press the DVD key of the remote control.
• Point the remote control at the front of your DVD recorder, not at your TV set.
• The operating range of the remote control is 6 to 8 metres. It gradually decreases as the

batteries wear down.This is a good indicator of the state of the batteries.When the
batteries require replacing, the signal lamp on the remote control flashes when you use it.

• Make sure no objects (or animals) are in the path of the infrared beam between the

remote control and your DVD recorder.They may block the beam and thereby cause a
malfunction of your DVD recorder.

The remote control of your DVD recorder also controls another device

• Some DVD players made by the Thomson group (Thomson, Brandt, Ferguson, Saba,

Telefunken) react to the same codes.To avoid this inconvenience, you can program your
DVD recorder and its remote control so they have a different code to those of the other
devices. Refer to page 75.

The remote control and the DVD recorder don’t work anymore: everything
seems blocked

• Unplug your DVD recorder from the mains for a few moments and plug it back in.

Image problems

You don’t see any picture

• Turn on your TV set and your DVD recorder.
• On your TV set, select the socket which receives the signals from your DVD recorder

(AV1,TV1, AUX1, etc., depending on the make, if connected as shown on page 4).

• Make sure that all sockets are well pushed into the various sockets.

You can contact THOMSON by dialling: 0871 712 1312

(For Great-Britain, all calls will be charged 0,10£ / mn)

www.thomson-europe.com

Further information

2_DTH8060_en.qxd 17/08/05 12:22 Page 70

Advertising