Triax Armored SR920W - Manual (Page 7)

In CH RO mode you can measure up to 23
hours 59 minutes and 59 seconds.
In STOP W . mode you can measure up to
60 minutes in 0.2 second intervals.
Lap time measurement is also possible in
CH RO mode.
The watch measures in 1/10 (0.1) second
increments for the first hour, and in one
second increments thereafter.
“Lap time” refers to an elapsed time required to
cover a distance from the start to a given point.
The chronograph and stopwatch must be stopped to
reset.
The CH RO and STOP W. will continue running if
you switch to a different mode.
CH RONOG RAPH (Super) • STOP Watch (Regular)
8
E NG
START/
STOP
LAP/
R E S ET
START/
STOP
LAP/
R E S ET