Triax Armored SR920W - Manual (Page 8)

In CH RO and CH RO .01 modes, the hands indicate
different time units depending on the mode in
use and the elapsed time.
How to Read the Hands
• After 1 hour, the 24-hour hand
indicates the elapsed hours
• After 10 minutes have elapsed, the
1/10 second hand pauses at the 12
o’clock position while the second and
minute hands are moving
• When the measurement is stopped or lap time
is measured, the 1/10 second hand indicates
the 1/10 seconds measured
• When the measurement is restarted or lap time
measurement is released, the 1/10 second hand
returns to rest at the 12 o’clock position
CH RONOG RAPH (Super) • STOP Watch (Regular)
E NG
9
START/
STOP
LAP/
R E S ET
START/
STOP
LAP/
R E S ET