Triax Armored SR920W - Manual (Page 9)

In CH RO .01 mode you can measure in
1/100 second increments.
Split time measurement is also possible.
The elapsed 1/100 seconds are indicated
by the tail of the hour hand.
How to Read the Hands
Measurement of less than 10 Minutes
• The 1/100 second hand pauses at the
12 o’clock position while the 1/10 second
and second hands are moving
• When the measurement is stopped or split time is
measured, the 1/100 second hand indicates the 1/100
seconds measured
• The 24-hour hand does not represent the lapse of time
• After 10 minutes has elapsed the 1/100 second and 1/10 second hands pause
at the 12 o’clock position while the second hand keeps moving
1/100 (.01) second CH RONOG RAPH (Super only)
10
E NG
START/
STOP
LAP/
R E S ET