Uniden DX15686 Series - Manual (Page 11)

0
3) Make sure that the charge/in.use LED and LED illuminate. If the LED
does not illuminate, check to see that the AC adapter is plugged in and
that the handset makes good contact with the cradle’s charging contacts.
Note:.
•.. Connect.the.AC.adapter.to.a.continuous.power.supply.(not.
controlled.by.a.wall.switch).
•.. Place.each.cradle.close.to.the.AC.outlet.to.avoid.long.
extension.cords.
•. Charge.your.handsets.at.least.15.-.20.hours.before.plugging.
into.the.phone.line..
4) Once the handset battery packs are fully charged, connect the telephone
line cord to the TEL.LINE jack and a telephone outlet. If your telephone
outlet isn't modular, contact your telephone company for assistance.
Modular Modular