Uniden DX15686 Series - Manual (Page 19)

8
2) Press [
] to move the pointer to select DIAL.
3) Press
[select/channel] to set the phone to pulse dialing.
4) Press
[end] and return the handset to the base unit to complete the setting. The handset
returns to standby.
Note:.
•. If.your.phone.system.requires.pulse.dialing.and.you.need.to.send.the.DTMF.tones.during.a.call,.
you.can.temporarily.switch.over.to.tone.dialing..(Refer.to."Tone.Dialing.Switch-over".on.page.28.)
•. To.enable.the.setting.change.of.Dialing.Mode,.you.need.to.return.the.handset.to.the.base.unit.
when.you.complete.the.setting.
Setting.the.Language
You can change the language the handset menu displays. Choose from English, French, or Spanish.
To change the language setting:
) When the phone is in standby, Press and hold
[cid/menu]. The following screen appears.
2) Press [
] to move the pointer to select LANGUAGE.
3) Press
[select/channel] to select ENG, FR. or ESP.
4) Press
[end] or return the handset to the charging cradle to complete the setting. The
handset returns to standby.