Uniden BEARCAT BC95XLT - Manual (Page 40)

40
Special Features
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a Close Call signal is
detected.
ALt OFF: The scanner does not provide any
alert when a Close Call signal is detected.
6. Repeatedly press or until the option you want
appears, then press E to select it. Otherwise, press
if you do not want to select it. Then skip
to Step 11.
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common
pager frequencies.
PS OFF: The scanner alerts you when it receives
hits on common pager frequencies.
8. Repeatedly press or until the option you
want appears, then press E to select it. Other-
wise press if you do not want to select it. Then
skip to Step 11.
9. Press E while C-C.dnd appears. One of the fol-
lowing Don’t Disturb options appear:
• dnd ON: The scanner checks for a Close Call
signal every 2 seconds only if the scanner is not
stopped on a transmission.
• dnd OFF: The scanner checks for a Close Call
signal every 2 seconds even if the scanner is
stopped on a transmission.
10. Repeatedly press or until the option you
want appears, then press E to select.
11. When you select the option, press Scan to start
Close Call search. Otherwise, to continue normal
scanning, repeatedly press Func until
f disappears
then press Scan.