Uniden WDECT 3315 - Manual (Page 13)

[  ]
Handset Setup
The following submenu options must be set separately for each handset.
Submenu name Description
Edit Voice Mail Program or delete the voice mail access number (see page 12).
Ringer Tones Adjusting the ringer tone (tone your phone makes when ringing)
(Default is Flicker) (see page 13).
Set the distinctive ring (see page 13). “Distinctive Ring” allows you to preset
memory locations with a designated ring tone. When an incoming call
is received and the Caller ID information matches the information in one
of the memory locations, the distinctive ring that has been stored for that
particular Caller will sound. If you have set multiple memory locations with
distinctive rings, switching the setting to “Distinctive Off” will result in no
distinctive ringing. All incoming calls will have a normal ring tone. Switching
to “Distinctive On” will activate all programmed distinctive ring memory
locations.
AutoTalk Allows you to answer the phone without pressing or speaker.
(Default is on) When the AutoTalk is set to on, simply remove the handset from the
cradle and the phone automatically answers the call (see page 13).
Anykey Answer Allows you to answer the phone without pressing or
(Default is on) speaker.
When the Anykey Answer is on, you can answer a call by pressing any
number key, tone , or on the handset (see page 14).
Banner (True Banner) Customize your handset(s) by giving it a banner name. The name will be
displayed on the LCD screen during standby mode, Intercom, Transfer,
Room Monitor and Copy Phonebook operation. The banner name will be
displayed on the receiving handset as well (see page 14).
Key Touch Tone Allows you to set your phone’s key touch-tone to on or off (tone your
(Default is on) keypad makes when keys are pressed) (see page 14).
Distinct. Ring
(Default is on)