Uniden WDECT 3315 - Manual (Page 15)

[ 11 ]
Entering the Menu
1) Press the /del key in standby mode.
2) Use /vol/ or /vol/ to move the pointer to
a desired main menu (DirectLink Mode, Room
Monitor, Handset Setup, Global Setup, and
System Reset).
3) Press to select the desired main menu.
4) Use /vol/ or /vol/ to select a desired submenu, and then press
to enter.
In the submenu, use /vol/ or /vol/ to select an item. Press
to confirm your selection. For detailed instructions, see the following
sections for the desired submenu.
5) To exit the menu, press or return the handset to the cradle.
DirectLink Mode
Entering the Two Way Communication between the
Handsets Anywhere without the Base
1) Enter the DirectLink Mode menu (see “Entering
the Menu” on page 11). To enter DirectLink mode
press [SELECT]
appears.
2) Press to enter the DirectLink mode. You will hear a confirmation
tone, and DirectLink Mode Complete appears.
To adjust ringer volume, press /vol/ or /vol/ to select one of three
ringer volume (off, low, or high).
3) To return back to the normal mode, exit the DirectLink mode.
Press /del, and then , or return the handset to the cradle.
DirectLink Mode Cancel appears.
To enter
DirectLink mode
press [SELECT]
SETTing up ThE MEnu
To back to the
previous screen,
press /
del.
DirectLink Mode
Room Monitor
Handset Setup