Uniden WDECT 3315 - Manual (Page 16)

[ 12 ]
Room Monitor
Using Room Monitor
1) Enter the Room Monitor menu (see “Entering the
Menu” on page 11).
To Room Monitor appears.
2) Select the handset you want to monitor by using
/vol/ or /vol/ .
3) Press .
Room Monitor appears, and you hear sounds in the
room where the handset is installed.
4) To finish the Room Monitor, press or return
the handset to the cradle.
Handset Setup
Programming your Voice Mail Access Number
1) Enter the Handset Setup menu, and then the Edit
Voice Mail submenu (see “Entering the Menu” on
page 11). Edit V-mail No. appears.
2) Enter your personal access number using the number keypad ( 0-9),
tone , , /del, or redial/pause (up to 20 digits).
3) Press . You will hear a confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in
step 2 using /del and .
This is an example,
if you have handset
#1 and #2.
The Room/
Baby monitor
function is not a
replacement for
regularly checking
the safety and
security of children.
The operating time
is limited to the
remaining charge
of the battery and
is not suitable
for continuous
overnight use.
Edit V_mail No.
1234567890
To Room Monitor
Handset #2
RoomMonitor
Handset #2