Unitech PA950 - Manual (Page 45)

4-45
Connect to a PC
Connect to a PC via a cable or cradle
Connect to a PC via infrared
Connect to a PC via a cable or cradle
Connect your device and PC via a cable or cradle to start synchronization.
The baud rate and/or cable type is set automatically. If you have problems
connecting, try lowering the baud rate or selecting a different type of
cable, such as USB.
1. Tap > ActiveSync > Tools > Options > PC tab.
2. Tap Options.
3. Select Enable PC sync using this connection, and select a baud rate
or cable type. The next time your device and PC are connected, this
new setting will be used.
4. To disconnect, remove your device from the cradle or detach it from the
cable.
See Also: Connect to a PC via infrared
Synchronize remotely with a PC
Connect to a PC via infrared
1. Follow the instructions in ActiveSync Help on the PC for setting up your
PC.
2. Line up the infrared (IR) ports according to the instructions in your
owner's manual so that they are unobstructed and within a close range.