Uniden BC785D - Manual (Page 31)

Note: • You can also ▲ or ▼ when selecting a channel. Press and hold ▲ or ▼ for
1second to move up/down more quickly.
• To clear a mistake while entering the frequency, press (decimal key) repeatedly
until the display is cleared.
• If you enter a channel or frequency which is out of the
scanner’s range, a beep will sound and ERROR
appears on the display.
• For each channel, you can also change the step size or
the mode. (See page 93).
☞ Remember! You can also use ▲ or ▼ instead of rotating the
VFO.
Also instead of pressing E, you can press the VFO control.
Deleting a Stored Frequency
To delete a stored frequency:
a. Select a channel.
b. Press 0.
c. Then press E.
Note: Channels with no frequencies are automatically
locked out.
Editing a Stored Frequency
1. Press MENU.
2. Select 2:SCAN OPTION / 1:CONVENTIONAL by rotating the VFO and pressing
E.
3. Select the channel number you want to edit by rotating the VFO and pressing E.
4. Select 1:FREQUENCY by rotating the VFO and pressing E.
5. Edit the frequency by using (decimal key) and the keypad and pressing E.
☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing E, you can press the VFO control.
Duplicate Frequency Alert
If you enter a frequency which has been stored in another channel, you will hear a beep and
the channel stored displays WARNING.
Press (decimal key) to clear and start again.
––– OR –––
Press E again to store the frequency in both channels.
.
.
.
27
C 010
512.0000 NFM
ERROR
OUT OF CHANNEL
C 010
512.0000 NFM
OUT OF BAND
C 010
512.0000 NFM
WARNING
DUPLICATE 017
C1000
0000.0000
BC785D 11/8/2 1:01 PM Page 27