Uniden BC785D User Manual

Page 69

Advertising
background image

2. Select USER CUSTOM by rotating the VFO and pressing

E.

3. Select the size code for the first block by rotating the VFO.

4. Press E.

The next available block displays.

5. Repeat step 3 and 4 until you have selected a size code for

each block.
For details about each size code,
see "Fleet Map Size Codes"
in the Appendix.

☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.

Also instead of pressing E, you can press the VFO control.

Programming a Hybrid System

A Hybrid system is simply a Type I system with some blocks designated as Type II blocks.
To program a Hybrid system, follow the steps listed in "Programming a Fleet Map" in the
previous section. However, if you want a block to be Type II, select Size Code S-0.
When you begin searching a trunking bank with a Hybrid Fleet Map, you will see both types
of system IDs. That is, Type II IDs usually appear as an even number without a dash; Type I
IDs appear as a three or four digit number, followed by a hyphen, followed by a one or two
digit number.

Setting the Base, Spacing Frequencies and Offset Channel for Motorola
VHF/UHF Trunked Systems

To properly track Motorola VHF and UHF trunked systems you must enter what is known as
the base, the spacing frequencies and offset channels for each system.

To find these out, check the scanner.uniden.com or www.bearcat1.com/free.htm and
other web sites and frequency resources.

To enter the Base, Spacing Frequencies and Offset Channel: (You can set up to three sets
of these, but almost all systems only use one set)

1. Press MENU.

2. Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E.

3. Select the bank number by rotating the VFO and pressing E.

4. Select 1:TRUNK TYPE / 1:ON / 4:TYPE 2 UHF or 5:TYPE 2 VHF by

rotating the VFO and pressing E.

5. Select BASE CONFIG from 1 - 3 by rotating the VFO

and pressing E.

6. Enter a new Base Frequency with the keypad.

7. Press E.

The display changes for entering the Spacing Frequency.

65

M 001

867.8375 NFM

BLOCK 0

SIZE CODE 0

M

406.0000

ENTER FREQUENCY

BASE FREQUENCY 1

M 001

867.8375 NFM

SELECT FLEET MAP

USER CUSTOM

BC785D 11/8/2 1:01 PM Page 65

Advertising