Connecting the base and chargi.ng the handset, Connecting.the.base, And.charging.the.handset – Uniden DCT736 User Manual
Page 14: Connecting.the.base.and.charging.the.handset
Advertising
14
Connecting.the.Base.and.Charging.the.Handset.
Connect.the.AC.adapter.to.the.
DC.IN.9V.jack.
Connect.the.AC.adapter.to.a.wall.outlet.that.is.not.controlled.by.a.switch..
Place.the.handset.in.the.base.with.the.LCD.screen.facing.forward..
Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.not.illuminate,.check.to.see.that.the.AC.adapter.
is.plugged.in.and.the.handset.makes.good.contact.with.the.base.charging.contacts..
Charge.your.handset.at.least.15-0.hours.before.plugging.into.the.phone.line.
Note:.Use.only.the.supplied.AD-800.AC.adapter.with.your.phone..
Do.not.use.any.other.AC.adapter..
1.
.
3.
4.
5.
Advertising