Uniden DCT736 - Manual (Page 15)

15
Connecting.to.the.Phone.Line.
Once.the.handset.battery.pack.is.fully.charged,.
connect.the.telephone.line.cord.to.the. TEL.LINE.
jack.and.to.a.standard.telephone.wall.outlet..
Testing.the.Connection
To.test.your.connection.try.making.a.call..If.your.
call connects, the settings are fine. If your call
does.not.connect.check.the.following:
Check.the.AC.adapter.cord..Make.sure.it.is.
securely.connected.to.the.DC.IN.9V.con-
nector.and.to.a.standard.AC.power.outlet.
Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.
“battery.full”.icon,.check.to.make.sure.the.battery.is.properly.connected).
Change.“dial.mode”.(instructions.follow).
Changing.the.Dial.Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.
tone.dialing.or.pulse.dialing..These.days,.most.phone.networks.use.a.method.
called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.your.
phone.company.uses.Pulse.dialing,.you.will.need.to.change.your.phone’s.dial.
mode...If.you.cannot.connect.to.the.telephone.network,.please.follow.the.steps.
below.to.modify.your.phone’s.settings:
Press. [menu/clear]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
DIAL.MODE.submenu.
Scroll. [ ].to.select.PULSE..(The.initial.setting.is.TONE).
Press. . You hear a confirmation tone.
If.you.need.to.change.the.dial.mode.back.to.Tone,.follow.the.same.procedure,.but.select.TONE.in.step..
1.
.
3.
1.
.
3.
Base.Shown Base.Shown