Uniden T H E E X S 9 9 6 6 - Manual (Page 12)

10
Initial battery charging
Before connecting your phone for the first time, charge the
rechargeable battery pack for 15-20 hours without interruption.
1. Place the handset on the base.
2. Make sure that status LED lights.
If the LED doesn’t light, be sure the AC
adapter is plugged in and the handset
makes good contact with the base
charging contacts.
Charging optional battery packs
The base of your phone is equipped with a compartment for charging
an extra battery pack for use in your handset. You can obtain an
extra battery pack from your authorized Uniden dealer.
1. Pull the cover of the battery charger.
2. Put the battery pack in the
compartment with contacts
facing down.
3. Replace the charge cover.
A
e v
4. Charge the battery for 24 hours. When charging is complete, lift the
latch to remo the battery pack. To install the charged battery into the
handset, see INSTALLING THE HANDSET BATTERY P CK, page 9.
In the event of a power failure, your spare battery
pack temporarily provides power for the base so you
can still use your phone.
The status LED blinks red when the base is
powered by the spare battery.
CHARGING THE BATTERY PACK
Please visit your
authorized Uniden dealer
to obtain an extra battery
pack or contact the
Uniden Parts Department
at (800) 554-3988. Hours
are from 8:30 a.m. to
5:00 p.m. Central
Standard Time, Monday
through Friday.