Uniden T H E E X S 9 9 6 6 User Manual
Page 38
36
4. If y
5. After you finish the setting, press call id and return the handset
to the base.
ou want to set CIDCW, use
the
key or 2 to move the cursor
to
2 CIDCW
.
Press the
select
key to toggle between
On
and
Off
.
Programming Your Area Code
1. Press and hold
call id
for two
seconds. The following screen appears:
2. Use the
and
keys or the number
key (1 or 2) to select
Line 1
or
Line 2
.
Then, press
select
.
The following screen appears:
3. Use the and keys or 3 to move the
cursor to select
3 Area Code:
Press
select
. Use the number keypad to
enter or change the area code. Press
select
again.
4. After you have made your selections, press
call id
and return the
handset to the base.
Screening your calls
Caller ID allows you to review caller
information before answering your
phone. At the beginning of the second
ring, the display shows the line number
that is being used, name, and phone number of the caller. If your
Caller ID service is number only, the name does not appear
on the second line.
If a name or number is not available, the display shows a
message such as Incomplete Data, Private Number,
Private Name, etc.
Call(Line 1)
Smith John
817-555-1212
1>Auto Talk:Off
2 CIDCW :On
3 Area Code:
Caller ID Setup
1>Line 1
2 Line 2
1>Auto Talk:Off
2 CIDCW :On
3 Area Code: