Uniden UBCT9 - Manual (Page 30)


Band Search
Setting a Search Band
The UBCT9 can search up to 12 separate frequency ranges to help you discover new
stations in your area.
To set a Search Bands, enter into the Band Search mode.
Band No Range (Mhz) Mode Step Display
1 0025.0000 - 0027.9950 AM 5kHz 25 - 28
2 0028.0000 - 0069.9900 FM 10kHz 28 - 70
3 0070.0000 - 0087.9875 FM 12.5kHz 70 - 88
4 0088.0000 - 0107.9000 WFM 100kHz 88 - 108
5 0108.0000 - 0136.9875 AM 12.5kHz 108 - 137
6 0137.0000 - 0147.9950 FM 5kHz 137 - 148
7 0148.0000 - 0173.9875 FM 12.5kHz 148 - 174
8 0174.0000 - 0224.9500 WFM 50kHz 174 - 225
9 0225.0000 - 0399.9500 AM 50kHz 225 - 400
10 0400.0000 - 0512.0000 FM 6.25kHz 400 - 512
11 0806.0000 - 0956.0000 FM 12.5kHz 806 - 956
12 1240.0000 - 1300.0000 FM 12.5kHz 1240 - 1300
1. Press SRCH. The upper and lower limits of the Bands
currently selected are on the display.
2. Use the or key to select the band you want to search.
Wait for about two seconds and the scanner will begin
searching that band. Or press HOLD/RESUME to begin
immediately.
Notes: • You must set the Search Bands prior to any searching.
• The scanner automatically increases its search speed up to 300 steps per
second for bands having 5 kHz steps. (Turbo Search)
• While searching, you can change the search direction by using the or key.
Make sure which of icon, “ SRCH” or “SRCH ” appears on the display.
UBCT9 OM 26 12/11/07 3:53:43 PM