Uniden UBCT9 User Manual
Page 55
Advertising
5
5. The data transfer begins from the First Unit to the Clone Unit.
During the data transfer, both scanners show the following
displays.
When the data transfer is complete,
displays.
If the data transfer is not successful, the following error
message will appear.
Note: • To clear
, press
(decimal key).
• Once you have completed the cloning of the scanners, reset the scanners by
turning the scanners OFF and then ON again. This is particularly important to
know if you wish to clone another scanner right away.
UBCT9 OM 51
12/11/07 3:54:04 PM
Advertising