UMAX Technologies Mirage II - Manual (Page 22)

15
Multiple Scanning Using the A3/ 35mm Slide Tray
1. Place the 35mm slides into the slide holders on the slide tray.
2. Lift up the A3 Scanner’s transparency adapter and place the Slide Tray on the
scanner’s object glass.
3. Line the orientation holes up in such away that the entire tray fits on to the
object glass and the slide tray borders line up with the rulers on the scanner’s
object glass.
Note: Although misalignment will not prevent the scanner from scanning,
portions of the Slide Tray may appear in the resulting scan if the frame is not
perfectly aligned.
Repeat steps 1 through 3 for placement of additional slides.