UMAX Technologies Mirage II - Manual (Page 9)

2
A Glance at Your Scanner
Take a few minutes to become familiar with the different parts of the scanner. The
figure below shows the locations and names of the scanner parts. A brief description
of each part is also given.
Object Glass - The glass surface on which the document or image for scanning is
placed; made of tempered glass with excellent optical qualities.
LED Indicators - Power: Indicates the scanner is powered on; Ready: A constant
un-flickering light indicates the scanner is ready to scan. Option: Indicates that an
optional transparency adapter is attached.
Optical Assembly Lock - Locks the scanner's optical component system.
Transparency Adapter - A transparency adapter for scanning transparencies.
SCSI ID Switch - Used for setting the scanner's SCSI ID.
50-Pin SCSI Connector - Where you plug in the 50-pin SCSI cable.
Transparency Adapter Connector - For use with a transparency adapter.
Power Cord Connector - Where you plug in the scanner power cord.
Front View
Rear View
LED Indicators
SCSI ID Switch
50-pin SCSI Connector
Power Cord Connector
Object Glass
Transparency Adapter
Optical Assembly Lock
Power Switch
Transparency Adapter Connector