Uniden GNS8435 - Manual (Page 85)

57
5.1.5 Route Recalculation
Once a route is planned, this setting will tell Uniden Navigation what to do when you
deviate from that route.
5.1.5.1 Automatic
The route will be recalculated automatically a few seconds after you go astray.
5.1.5.2 Ask First
Uniden Navigation can also ask your preference each time you leave the planned
route. The route will not be recalculated until you make your choice from the menu
that automatically appears (also explained here: Page 40).
Your options are:
• Recalculate: Uniden Navigation will recalculate the route with the previous
settings. The result is the same as if Automatic recalculation was selected.
• Drop Next Via Point / Delete Route: Uniden Navigation will remove the next via
point from the list and recalculate the route without it. If you have only one target
left, the label of the button will be Delete Route, and it will end navigation.
• Bypass: if you have deviated from the original route because of a traffic jam or
roadworks, you can instruct Uniden Navigation to avoid the original route for a
specified distance.
• Cancel: you can exit without recalculating the route. Navigation stops and will be
activated again when you find your way back to the original route.
5.1.5.3 Disabled
If you stick to the original route, and you wish to get back to it on your own, you
can disable recalculation. This way guidance will stop until you return to the
recommended route on your own.