Uniden GNS8435 - Manual (Page 94)

66
5.6.1.4 Coordinate display format
Positions are sometimes displayed with their addresses, and sometimes with their
coordinates. This setting lets you choose between displaying coordinates in degrees
(dd.dddddd); degrees and minutes (dd mm.mmm); or degrees, minutes and seconds
(dd mm ss.s).
Note: the coordinate display mode is independent from the coordinate input in Find
menu. You can use all three formats freely on the coordinate input screen.
5.6.1.5 Cockpit screen layout
There are three route data fields at the bottom of the portrait Cockpit screen, or on the
left of the landscape Cockpit screen.
There are three route data fields at the bottom of the Cockpit screen.
There are three route data fields on the left of the Cockpit screen.
Their content is fixed in Cruise mode (when there is no active route), but for
Navigation mode you can change their content on this screen. The available values
are listed here: Page 36.
5.6.2 Backlight settings
5.7 Screen settings
Here you can set how the display backlight behaves when using Uniden Navigation.
These settings are independent of the settings of the other applications of the
GNS8430/8435.
5.7.1.1 Power management
5.7.2 Power management
At the top of the screen you can set how the backlight will behave when the screen
has not been touched for a while.