Uniden BC246T - Manual (Page 55)

55
Programming Radio Systems
• See “Reviewing Locked Out Frequencies” on
Page 89
• See “Setting System Attenuation (Trunked Systems
Only)” on Page 70
• See “Deleting Systems” on Page 70
• See “Copying Systems” on Page 70
• See “Setting System Frequencies” on Page 55
• See “Entering/Editing Motorola Channel Groups”
on Page 55
Setting System Frequencies
SET FREQUENCIES E
New FREQUENCY E
Input a system frequency, then press E.
To enter additional frequencies, press , use the scroll
control to select New Frequency, then repeat the above.
Note: If you select Control Channel Only mode (see “Set-
ting Control-Channel Only (Motorola Systems Only)” on
Page 69), you only need to enter the frequency(s) that
can be assigned as the control channel. Most frequency
lists usually indicate which of the frequencies are the
control channel frequencies. Otherwise, you must enter
all of the frequencies.
Entering/Editing Motorola Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Setting Up a Channel Group
Edit Group E New Group E
The scanner creates a group with a default name of
Group nn
. nn increments by one for each new group you
create within a system.
Menu