Setting channel attenuation (conventional, Setting channel modulation, Conventional channels only) – Uniden BC246T User Manual
Page 76: Setting channel attenuation, Programming/editing optional settings
76
Programming/Editing Optional Settings
Setting Channel Modulation
(Conventional Channels Only)
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Modulation
E
This setting controls the demodulation method used for
the channel. Select your setting, then press E.
Auto
- the scanner uses the default modulation for the
frequency (see the table at the front of the manual).
AM
- the scanner uses AM (amplitude modulation) for the
frequency.
FM
- the scanner uses FM (frequency modulation) for the
frequency.
NFM
- the scanner uses narrowband FM for the
frequency.
Note: The default setting is AUTO.
Setting Channel Attenuation
(Conventional Channels Only)
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Attenuator
E
This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press E.
Menu
Menu