Uniden BC246T - Manual (Page 56)

56
Programming Radio Systems
Next, refer to the appropriate section to set group-wide
options:
• See “Entering/Editing the Group Name” on Page 71
• See “Setting the Group Quick Key” on Page 71
• See “Deleting Groups” on Page 72
• See “Copying Systems” on Page 70
• See “Entering/Editing Motorola Channels” on
Page 56
• See “Setting I-Call (Motorola and EDACS Systems
Only)” on Page 68
Entering/Editing Motorola Channels
Edit Channel E
New Channel E Input TGID
Enter the Talk Group ID for the channel, then press E.
Notes:
• Motorola Type 2 Talk Group ID's are entered as
5-digit numbers.
• Motorola Type I Talk Group ID's are entered as two
numbers separated by a hyphen. Use the decimal
point to enter the hyphen.
• To enter an I-Call ID, press , then enter the ID.
The appears as an
i
when entering the ID, but it
appears as a seven ( 7 ) when it is active on a Type 2
system.
Then, refer to the appropriate section to change a
channel setting:
• See “Setting Emergency Alert (Motorola and EDACS
Systems Only)” on Page 68
• See “Editing the Channel Name” on Page 73
• See “Setting Channel Alert” on Page 74
• See “Setting Channel Lockout” on Page 77
• See “Deleting Channels” on Page 78
• See “Copying/Pasting Channels” on Page 78