Univex OHDADJ - Manual (Page 7)

7
STEP 4:
FIGURE 4
• SECURELY assemble the BENCH ADJUST ANGLE (6) to the LOWER BENCH FRAME (5) using two 1/2 X 1” BOLTS (18) and two
1/2” INT TOOTH LOCK WASHERS (23) as shown in FIGURE 4
STEP 5:
FIGURE 5
• SECURELY assemble the SEAT PAD (10) to the ADJUSTABLE SEAT SUPORT (3) using two M10 X 35mm BOLTS (15) and two 3/8” INT
TOOTH LOCK WASHERS (24) as shown in FIGURE 5
M10 X 35mm 15
1/2 X 1” 18
6
23
24
3
10
5