Univex OHDADJ - Manual (Page 8)

8
STEP 6:
FIGURE 6
1/2 X 5” 21
23
1
26
3
• SECURELY assemble the ADJUSTABLE SEAT SUPPORT (3) to the UPPER BENCH FRAME (1) using one 1/2 X 5” BOLT (21), two
1/2 INT TOOTH LOCK WASHERS (23), and one 1/2” LOCK NUT (26) as shown in FIGURE 6.
• Assemble one SPRING PIN ASSEMBLY (12) to the UPPER BENCH FRAME (1) as shown in FIGURE 6. (NOTE: Tighten jam nut
SECURELY.)
12
• SECURELY assemble the BACK PAD (11) the the BACK PAD SUPPORT (2) using two M10 X 35mm BOLTS (15), two M10 X 35mm
FLAT HEAD BOLTS (14) and two 3/8” INT TOOTH LOCK WASHERS (24) as shown in FIGURE 7
STEP 7:
FIGURE 7
11
24
M10 X 35mm 15
2
M10 X 35mm 14
FLAT HEAD BOLT