Univex OHDADJ - Manual (Page 9)

9
STEP 9:
FIGURE 9
• Assemble the BACK PAD ADJUST (9) to the BACK PAD SUPPORT (2) using one 1/2 X 10” BOLT (22), two 1/2 INT TOOTH LOCK
WASHERS (23) and one 1/2” LOCK NUT (26) as shown in FIGURE 9.
Thank you for purchasing the OLYMPIC HEAVY DUTY ADJUSTABLE BENCH. If unsure of proper
use of equipment, call your local Hammer Strength distributor .
2
26
9
23
1/2 X 10” 22
STEP 8:
FIGURE 8
• SECURELY assemble the BACK PAD SUPPORT (2) to the UPPER BENCH FRAME (1) using one 1/2 X 4-1/2” BOLT (20), two 1/2 INT
TOOTH LOCK WASHERS (23) and one 1/2” LOCK NUT (26) as shown in FIGURE 8.
1/2 X 4-1/2” 20
2
23
1
26
SERIAL NUMBER