Uniden BC355C - Manual (Page 18)


Plug one end of the Vehicle Power Adapter into the vehicle’s
accessory power jack and the other end into the DC .V jack
on the back of the scanner.
Connect the mobile antenna plug into the ANT connector on
the rear panel. For more information on antenna installation,
please refer to the instruction guide that came with your
mobile antenna.
Permanent Mobile Installation
Permanently installing the BCC scanner into a vehicle involves
two main steps - physically installing the scanner and physically
connecting the power supply. It does not matter which is installed
first; perform these procedures in an order that is most appropriate
for your vehicle’s configuration.
Permanently Mounting the BC355C Unit
Select a location in your vehicle to mount the BCC unit.
Avoid any locations that could interfere with your driving. In a
passenger car, the ideal location is underneath the dashboard
on the passenger side.
Use the mounting bracket (optional) as a template for
marking the location of the mounting screws.
.
.
.
.