Uniden BC355C - Manual (Page 24)


KEY PURPOSE
ClOSE CAll Press this key to begin monitoring for strong,
nearby signals. Pressing this key cycles
through the frequencies in the following
order:
Close Call ® Priority - CC checks
for Close Call hits every  seconds while
monitoring other frequencies. You will
hear a slight break in reception while
Close Call Priority is on.
Close Call Do Not Disturb
- Checks
for Close Call hits every  seconds
unless the scanner is already receiving a
transmission. This prevents the breaks in
audio, but can check less often.
Close Call Only - Press the Close Call key
for longer than . seconds. The Close
Call Priority icon flashes to indicate this
mode.
•
•
•