Permanently connecting the mobile power supply – Uniden BC355C User Manual
Page 19
9
Note: If there are screws already holding the dashboard,
you may be able to use the same screw holes to mount the
bracket .
Drill the necessary holes and secure the mounting bracket in
place using the screws provided.
CAUTION: Do not drill into air bags . Do not drill if what is
behind the dashboard is unknown .
Mount the scanner to the bracket only after the wiring has
been connected to the rear panel.
Permanently Connecting the Mobile Power Supply
CAUTION: If you are not experienced in connecting
accessories to the vehicle fuse box, please see your
automotive dealer for advice on proper installation .
Check the vehicle battery connections to determine which
battery terminal (positive or negative) is grounded to the
engine block or chassis. Most of today’s vehicles use a
negative ground. If your vehicle has a negative ground, follow
Steps and . Otherwise, skip to the Caution in Step .
.
.
.