USRobotics MAXg - Manual (Page 9)

5
Installing JUST the Wireless MAXg USB Adapter
Step One: Install the Wireless MAX g USB Adapter and drivers
A. Insert the USB Adapter Installation CD-ROM into the CD-ROM drive of the computer you are
installing the USB Adapter in. The Installation CD Graphical User Interface (GUI) will appear
on your screen. If prompted, select your preferred language.
Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type
D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and
click
OK.
B. Click Installation.
C. Follow the on-screen instructions.
D. When prompted, locate an available USB slot and fully insert the Wireless MAXg USB
Adapter.
E. When prompted, click Restart to restart your computer.
Note: You may see a screen which says “Digital Signature Not Found” or “Windows
Logo testing”. Click
Yes or Continue Anyway. U.S. Robotics has thoroughly tested this
driver in conjunction with the supported hardware and has verified compatibility with
Windows XP and 2000. Because U.S. Robotics wants its customers to take full
advantage of the network card’s functionality, it has made the drivers available.