Uniden 2305 - Manual (Page 5)

[ 4 ]
Recharge your handset on a regular basis by returning the
handset to the charger after each phone call.
Battery use time (per charge)
From fully charged (15-20 hours charge time)
• Up to 7 hours continuous use
(up to 5 hours when the Clarity Booster is On)
• Up to 10 days when the handset is in the standby mode
(up to 15 hours in the DirectLink mode)
Battery Information
Low battery alert
When the batteries are very low and need to be charged, the phone
is programmed to eliminate functions in order to save power.
The batteries need to be charged when :
- The empty battery icon appears.
- “Low Battery” appears in the display.
If the phone is in the standby mode, none of the keys will operate.
If you are on a call, complete your conversation as quickly as
possible, and return the handset to the charging cradle.
• Use only the Uniden battery (BT-446)
supplied with your phone. Replacement
batteries are also available through the
nearest Uniden dealer. (See page 1.)
• Recharge your handset on a regular basis
by returning the handset to the charger
after each phone call.
3 Make sure you have a good connection by
slightly pulling on the battery wires.
If the connection is secure, the battery
jack will remain in place.
4 Place the battery case cover back on the
handset by sliding it upwards until it
clicks into place.
5 Place the handset in the charging cradle with the
keypad facing forward.
UU881BH(WDECT2305) ENG 5/10/04 3:57 PM Page 4