Uniden 2305 - Manual (Page 6)

[ 5 ]
YOU NEED TO REGISTER THE WDECT2305 TO THE MAIN
BASE BEFORE USE!
1 Before registering the handset,
the battery pack must be
charged for 15-20 hours.
2 Place the extra handset in the
main base unit to begin
registration. (Picture is the
WDECT2315 series main base.)
3 While the handset is
registering, Handset
Registering will appear in the
LCD. When “Registration
Complete” is displayed, the
handset has been registered to
the base. If “Registration
Failed” appears, please try
these steps again.
• The handset can be registered when the main base is in
standby mode.
• Standby Mode - The handset is not in use and
has not been pressed.
Register the Handset
Cleaning the battery charging contacts
To maintain a good charge, it is important to
clean the charging contacts on the handset
once a month.
Use a dry cloth or pencil eraser to clean.
R e g i s t r a t i o n
C o m p l e t e H a n d s e t
R e g i s t e r i n g
WDECT2305
Handset
WDECT2305
Handset
Charger
Main Base
WDECT2305 Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the WDECT2305
handset in the main
base to register.
1
2
3
contacts
Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of the
telephone and damage the finish.
UU881BH(WDECT2305) ENG 5/10/04 3:57 PM Page 5