Changing to a different camera – Uniden UDW-10003 User Manual
Page 14
Advertising
14
Changing to a Different Camera
On the receiver, press
to cycle through the enabled channels from CAM1 through CAM4. After
the last enabled channel, the receiver goes back to the first camera.
Each time you press
, the receiver goes to the next enabled channel, regardless of whether
there is a camera present on that channel. If there is no camera signal on a particular channel,
the receiver shows a black screen with the message No Signal.
You should only turn a channel On if you have a camera paired to that channel.
The receiver skips any channels that are set to Off in the menu.
►
►
►
►
4
3
2
1
4
3
2
1
NO SIGNAL
4
3
2
1
NO SIGNAL
4
3
2
1
4
3
2
1
(Channel CAM2
set to Off.)
4
3
2
1
(Channel CAM2
set to Off.)
Advertising