Uniden UDW-10003 - Manual (Page 4)

4
Getting Started
Connect the Power
Connect one AC adapter to the camera’s power input and the other to the receiver’s power
input. (The two adapters are exactly the same.)
Connect the other end of each adapter to a standard 120 volt AC indoor outlet.
Press the
POWER button on both the receiver and the camera; the bottom light on the left (the
Power status light) should turn on.
If... Try...
a Power status light
doesn’t come on
reconnecting the AC adapter
seeing if the power outlet is controlled by a wall switch
-
-
Charge the batteries
The batteries in your camera and receiver will charge whenever the power is connected. Let the
batteries charge completely (about 8 hours) before you unplug the camera and receiver to move
them around. (You can still use the camera and receiver: just keep them plugged in.)
1.
2.
3.
LINK
POWER
button
LINK
POWER
button
POWER
button
POWER
button