Uniden UDW-10003 - Manual (Page 9)

9
Button What it does
DOWN
In zoom mode: pan to the bottom of the zoom area.
In the menu: move the cursor down one line.
In quad display: go to channel 2.
-
-
-
SELECT
CAMERA Cycle through the active cameras.
From the pairing menu: link to the selected camera.
-
-
ZOOM Enter and exit zoom mode. -
POWER Turn the receiver on. Press and hold to turn it off. -
What the lights mean
Light State What it means
Power status
On The receiver is on.
Off The receiver is off.
Battery status
Flashing The receiver is in pairing mode.
Green The battery is charging.
Red The battery is low; the receiver will turn off in 3 minutes.
Off The battery is fully charged.
What the connections do
Connector Use it to
USB output
Connect the receiver to your computer for use with the Uniden Guardian
Software. (See the software manual for more information.)
Audio/video output Send the signal from the camera to a standard TV (see page 12).