Uniden Waterproof DSC Marine Radio UM380 User Manual

Page 18

Advertising
background image

14 English

x

To prevent stuck microphone problems or situations where

PUSH TO TALK

is pushed

accidentally, the radio limits your talk time to 5 minutes in a single transmission. If you

talk for over 5 minutes continuously, the display shows RELEASE MIC BUTTON.

x

For the best sound quality, hold the microphone about two inches away from your mouth.

x

You cannot transmit while the radio is in weather mode or scan mode.

x

See the channel lists beginning on page 37 for a list of receive-only channels.

Boosting the transmission power

In most situations, the 1 Watt transmission power is all you need. If you find yourself far

away from other stations and have trouble getting a response, you may need to boost the

transmission power from 1 Watt to 25 Watts:

1. Select the channel you want to transmit on.

2. Push and hold

ENT-1W/25W

for two seconds. The display shows 25 Watts in the upper left

hand corner.

3. The transmit power remains at 25 Watts until you change the setting back. Push and

hold

ENT-1W/25W

for two seconds. The display shows 1 Watt.

#

nOte: Don’t forget to change the transmission setting back to 1 Watt when you move closer
to other stations.

#

nOte: By default, when you change to channel 16, the radio automatically boosts the
power to 25 Watts. Be sure to change the power back to 1 Watt if you are not making an
emergency transmission.

Some channels (for example, channels 13 and 67) limit the power of transmission to 1 Watt

so that there is less interference between boaters attempting to use the channel at the same

time. If you switch to one of these channels, the radio changes back to 1 Watt automatically.

See the channel lists beginning on page 37 for a list of power-restricted channels.

Choosing triple Watch or Dual Watch

In Triple Watch mode, the radio briefly checks channels 16 and 9 every two seconds. In Dual

Watch mode, the radio checks channel 16 only. Generally, Triple Watch is used in areas

where channel 9 is used as a hailing frequency while Dual Watch is used in areas where

channel 16 is used for distress and hailing. Your radio comes set to use Triple Watch; if you

want to use Dual Watch instead, you will have to select it in the setup:

1. Press and hold

CALL MENU

to display the normal menu.

2. Select Setup and then Dual/Tri Watch.

Dual/TriWatch

88

A

Dual Watch

Triple Watch

[Exit]

Dual/TriWatch

Setup

Press and hold -

Back[CLR]

Select[ENT]

UM380_20101221.indd 14

4/13/2011 11:25:10 AM

Advertising
This manual is related to the following products: