Uniden Waterproof DSC Marine Radio UM380 User Manual
Page 23
19
English
You can get more information on MMSI numbers at these resources:
x
The dealer where you purchased the radio
x
Recreational boaters can obtain an MMSI number from the Boat Owner’s Association
of the U.S. (http://www.boatus.com/mmsi/ or call 800-536-1536) or Sea Tow Services
International (http://seatow. com/boating_safety/mmsi.asp)
x
Commercial boaters need a ship station license to get an MMSI number. For more
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html.
entering MMsi numbers
Individual or User MMSI Number
#
nOte: Be sure you have the correct user MMsi number before entering it in the radio. the
radio only allows you to enter the user MMsi once. if you need to re-enter the user MMsi
number, contact customer service (see back page for contact information). Follow the steps
below to enter your individual or user MMSI number into the radio:
1. Display the normal menu and choose the Setup sub-menu.
2. Select User MMSI. (If an MMSI number was already entered, the screen displays it with
the message Cannot change over 1 time. Contact customer service. (See back page for
contact information.).
3. Use
CHANNEL UP
and
CHANNEL DOWN
to enter the first of the nine digits;
CHANNEL UP
increases the number and
CHANNEL DOWN
decreases it.
4. When the first digit is correct, press
ENT-1W/25W
. The cursor moves to the next digit. Enter
the remaining eight digits of the MMSI number in the same way. If you make a mistake
while entering a number, press
CLR-SCAN
to erase the wrong number and the cursor is
moved to the left digit.
5. When the ninth digit is correct, press
ENT-1W/25W
. The radio displays the new MMSI
number and asks you to confirm. To save this MMSI number, select Yes; the radio asks
for confirmation again. To cancel this MMSI number, select No; the radio returns to the
Setup menu.
#
nOte: Be sure you entered the number correctly before confirming the entry. You can only
save the user MMsi once.
6. Before saving the number, the radio displays a final confirmation screen and reminds
you that this is a permanent setting. Press
ENT
to accept this MMSI. Press
CLR
to return to
the User MMSI Entry screen
0
________
Use the up and down arrows
to adjust each of the nine
digits in turn.
16
User MMSI
Back[CLR] Forward[ENT]
User MMSI
Setup
Press and hold -
[New]
UM380_20101221.indd 19
4/13/2011 11:25:11 AM