Erasing a stored name and/or phone number, Editing a stored name and/or phone number – Uniden XSR917/918 User Manual
Page 21
Page 13
ERASING A STORED NAME AND/OR PHONE NUMBER
1. Press and hold
. '
' is displayed.
2. Press
or
or enter a number (
-
) to select the memory location you would like to erase.
3. Press
.
4. Press
to move the pointer down to '
'.
5. Press
.
6. Press
to move the pointer to '
'.
7. Press
. A confirmation tone is sounded.
8. After about 2 seconds, '
' is displayed. You may delete the information in another memory location
(returntostep2)orpress
toreturntostandbymode.
Memory Store
Delete Memory
Yes
Memory Store
0
9
EDITING A STORED NAME AND/OR PHONE NUMBER
1. Press and hold
. '
' is displayed.
2. Press
or
, or enter a number (
-
) to select the memory location you would like to edit.
3. Press
. The memory location is displayed.
4. Press
to select '
'. The cursor flashes indicating that the display is ready for the name to be edited.
When a name has not been stored, the cursor appears at the beginning of the second line.
5. Use the number keys,
,
, or
/delete to edit the name. To edit only the phone number, skip this step.
6. Press
. The cursor flashes indicating that the display is ready for the number to be edited.
7. Use the number key,
/pause and
/delete to edit the phone number. The phone number cannot exceed 20
digits. If you don't want to change the phone number, skip this step.
8. Press
. You hear a confirmation tone. Memory Storage is complete. For example, if you store a name and number
into memory location number 1, the display shows '
'. After about 2 seconds,
9. Press
to return to standby mode.
Memory Store
Edit Memory
Memory 1 Stored
'
' is displayed.
Memory
Store
0
9
MEMOR
YD
IALING
transfer
transfer