Uniden XSR917/918 - Manual (Page 27)

RA
DIO
Page 19
USING YOUR RADIO
To turn ON the radio
To turn OFF the radio
To change bands (AM-FM)
Volume & Frequency
CH (Channel) Search
Move the slide switch to the on position.
The current frequency (station) is displayed under the clock display.
The station frequency shown will be the same as the one used last time.
Move the slide switch to the off position.
The frequency will disappear from the display.
Press to toggle. The station frequency shown will be the same as the one
used last time.
The radio's volume can be adjusted using the Volume knob.
The receiving frequency can be changed by pressing
or . The frequency
steps are +/- 9kHz for AM and +/- 0.1MHz for FM.
You can automatically search for the next available station or channel frequency
by pressing or for 1 second. Press to search for a higher frequency
and to search for a lower frequency.
kHz MHz is displayed while receiving AM and is displayed while receiving FM.